A necessary component of gardening – a necessary component of life, in fact – is preparation.
Last year, our area experienced extreme heat and draught and I was not prepared. Experience is such a great teacher. This year, I’m trying to plan ahead.
Already, our weather has been warmer than normal, and spring has come early. We’re just beginning to catch up on the rain deficit, but there’s no telling what moisture we’ll see through the rest of the garden season.
One of the methods I’ve seen is the use of ollas. Ollas are terra-cotta jugs or receptacles, buried into the gardening area aside the plants and filled with water to deliver it slowly (via the porous material) to the roots of the plants.
There are excellent options to purchase ollas, but I found them cost prohibitive. I found this great tutorial to make them from clay pots. I was inspired to make my own.
- Clay pots (two per olla)
- Gorilla glue
- Plumbers epoxy
- Silicone caulk
- Stone/ceramic plugs
- White exterior paint
- Caulk Gun
- Dry cloth
- Container of water
I dipped one clay pot top into the water container and set it on the dry cloth to dry slightly.
Gorilla glue was spread thinly over the rim of the other clay pot top. The two pots were placed together, top to top. This was done with each clay pot pair.
The pot pairs were weighted for an hour while the gorilla glue dried.
Once the glue was dry, the plumbers epoxy was used to adhere the stone pieces to one opening on each pot pair. The assemblies were left to dry for 24 hours.
Using the caulk gun, I placed a seal of caulk around each stone piece, and then around each glued section. With my finger covered by the dry cloth, I smoothed the caulk and pressed it into any remaining gaps. The pots were set out to dry for 24 hours.
All that’s left is to paint the tops of the ollas, which I’ll do when the weather is warm.
I can’t wait to see how well these work. I’ll keep ya posted. :)